Easily upgrade your KTM with the DENALI CANsmart Controller Gen II, designed to simplify accessory installation by tapping into your bike’s intelligent CAN bus system. This plug-and-play controller lets you power and customize up to four accessories—like lights, horns, and brake lights—directly from your KTM's switch cluster or the CANsmart Accessory Manager Software.

Preconfigured to control two sets of DENALI lights, the SoundBomb horn, and the B6 brake light, the CANsmart delivers seamless integration and smart functionality right out of the box.

The updated version offers more power and flexibility, with all four circuits capable of delivering 10 amps of continuous power, and each circuit can now support any type of accessory. New features include light modulation for increased visibility and the ability to cancel individual lights with turn signals for added safety. The unit supports up to 30 amps total, giving you everything you need to power your ride.

Features

• Set auxiliary lights to automatically switch between high and low beam using your factory high beam switch
• Independently turn on/off and dim two sets of lights using your original vehicle switches, with day and night settings
• Enable light modulation to make your auxiliary lights more visible to other drivers
• Flash your auxiliary lights three times by pulsing your high beam switch quickly
• Automatically cancel the corresponding auxiliary light when using your turn signal to prevent overpowering the signal
• Make auxiliary lights flash in the opposite pattern of your hazard lights for better roadside visibility
• Quickly connect high-power horns like the SoundBomb without extra wiring or relays
• Trigger a strobe effect on your auxiliary lights when you sound your horn, using either factory or aftermarket horns
• Activate brake lights during deceleration using smart technology that reads your vehicle’s speed in real time
• Choose from four different flash patterns for your auxiliary brake lights to improve visibility when braking
• Customize any of the four CANsmart circuits to control any accessory using the software’s dropdown menu
• Use a circuit to provide switched 12V power that turns on/off with your ignition
• Add a delay of up to 30 seconds before accessories power off after turning off the bike
• Power devices like GPS, phone chargers, or heated gear directly from your bike using the accessory circuit